Products related to Variable:
-
Rheostat variable resistor
BEK Variable Rheostat mounted on a yellow baseplate with sockets to accommodate the connection of 4mm plug leads. Excellent for general circuit work.Vary the current in a circuit using this rheostat.Supplied with 11O coil.Recommended Voltage 6V max.
Price: 10.64 £ | Shipping*: 7.19 £ -
Trend Varijig Variable Angle Guide
Variable angle guide for the router or saw. Adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. Adjustable angle range from 25 degree to 155 degree. Preset angle for 30, 45, 60, 90, 120, 135 and 150 degree. Router working length at 90 degree is 915mm (36 inch). Circular saw working length at 90 degree is 780mm (30 3/4 inch). Angle tolerance +/- 0.2 degree with zeroing facility. Adjustable position alloy extrusion with scale. Requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L. Power tools not included. Contents: 1 x Alloy extrusion with scale 1 x Protractor body 1 x Hex key
Price: 112.95 € | Shipping*: 7.95 € -
Faithfull Automatic Wire Stripper Variable Capacity
These Faithfull highly efficient Wire Stripping Pliers clamp and strip insulated cable in one quick action. The high-performance steel blades have five pre-set cable diameters and are hardened to 53HRC providing a long working life. An adjustable length guide allows the pliers to be set between 5 to 32mm to make repetitive stripping tasks quick and accurate. Strips insulation off wire sizes:1.0, 1.6, 2.0, 2.6, 3.2mm (AWG 18/14/12/10/8). Specifications: Cable capacity: 1-3.2mm.Adjustable length: 5-32mm. CAUTIONThis product is not insulated. Care should be taken to ensure any wire to be stripped has been isolated from any source of electricity. Additional Information:• Plier Type: Automatic
Price: 10.95 € | Shipping*: 4.95 € -
Bosch Professional Wire Stripper Variable Capacity
The Bosch Professional Wire Stripper is convenient for daily use. The spring-action mechanism enables precise adjustments to strip cables from 0-10mm² in diameter. This product is comfortable and safe to use, even one-handed thanks to the soft grip handles, anti-slip shoulders and opening spring. The robust chrome vanadium steel shanks ensure a long lifetime. Features & Benefits • Robust chrome vanadium steel shanks ensure a long lifetime • Comfortable and safe to use, even one-handed • Soft grip handles, snit-slip shoulders and opening spring • Spring-action mechanism enables precise adjustments to strip cables Specifications • Bosch Part Number: 1600A01V03 • Diameter: 10mm • Length: 160mm • Material: Chrome Vanadium
Price: 20.95 € | Shipping*: 4.95 €
-
What is a variable and non-variable quantity?
A variable quantity is a quantity that can change or vary, such as the temperature, time, or the price of a product. These quantities can take on different values and are often represented by symbols or letters in mathematical equations. On the other hand, a non-variable quantity is a quantity that remains constant and does not change, such as the speed of light or the number of sides in a triangle. Non-variable quantities are fixed and do not depend on any other factors.
-
Is it possible to have Ash's Greninja with a variable nature or a predetermined nature?
No, Ash's Greninja in the Pokémon anime has a predetermined nature, which is always Naughty. In the anime, Greninja's nature is a key part of its character development and storyline, so it cannot have a variable nature like Pokémon in the games. This predetermined nature adds to the uniqueness of Ash's Greninja as a character.
-
What is the difference between variable definition and variable initialization?
Variable definition is the process of declaring a variable and specifying its data type, such as int, float, or string. This tells the compiler or interpreter that a variable with a certain name and data type will be used in the program. Variable initialization, on the other hand, is the process of assigning a value to the variable for the first time. This can happen at the same time as the variable is defined, or at a later point in the program. Initialization gives the variable a specific value to work with, while definition simply sets up the variable's characteristics.
-
How can one express a variable in terms of another variable?
One can express a variable in terms of another variable by manipulating equations or formulas to isolate the desired variable on one side of the equation. This can involve performing algebraic operations such as addition, subtraction, multiplication, or division to rearrange the equation. By doing so, the variable of interest can be written in terms of the other variable, allowing for a clearer understanding of the relationship between the two variables.
Similar search terms for Variable:
-
Stanley Controlgrip Wire Strippers Variable Capacity
The Stanley Tools ControlGrip™ Wire Strippers are made from forged carbon steel with an induction hardened blade and tempered jaws for long life. Precision milled cutting edges and pivot for smooth opening and closing of the jaws. All exposed steel surfaces have been sanded and are protected against corrosion. With a bi-material, ergonomically designed handle that is easy to hold, even with oily hands.Additional Information:• Plier Type: Stripping
Price: 16.95 € | Shipping*: 4.95 € -
Draper Expert Wire Strippers Variable Capacity
Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Manufactured to DIN Standard Features and Benefits • Expert Quality • Slip guards for extra safety • Chrome vanadium steel fully hardened and tempered with induction hardened edges Contents 1 x Heavy Duty Soft Grip Wire Stripping Pliers, 150mm
Price: 19.95 € | Shipping*: 4.95 € -
Draper FS405V Variable Speed Fretsaw 240v
Aluminium table with parallel action arm design which allows quick and accurate cuts. Incorporates a work light and flexible shaft suitable for use with Draper Multi-Tool accessories. The dust blower keeps the cutting line clear and a dust extraction facility removes unwanted dust when connected to a dust extractor. The worktable tilts from 0 - 45°. Uses 127mm pin end blades and pinless fretsaw blades in conjunction with 24433 blade clamp holder (sold separately). Fitted with a cable and approved plug. Features and Benefits • Aluminium table • Parallel action arm design • Work light • Flexible drive shaft suitable for use with multi-tool accessories • Dust blower • Dust extractor • 0-45° tilting worktable • 127mm pin end blades • Can be used with pin less blades (blade clamp holder sold separately) Specifications Blade Length: 127mm Dimensions: 330 x 625mm Max Thickness of Cut: 50mm Motor: 90W Stroke Length: 20mm Strokes per Minute: 1550spm Table Size: 415 x 255mm Table Tilt: 0-45° Throat Depth: 405mm Weight: 13kg Contents 1 x Variable Speed Scroll Saw with Flexible Drive Shaft and Work light, 405mm, 90W
Price: 231.95 € | Shipping*: 7.95 € -
ITL Insulated Wire Strippers Variable Capacity
The ITL Insulated End Wire Strippers with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).Additional Information:• Length (mm): 150
Price: 36.95 € | Shipping*: 4.95 €
-
How can I store a JavaScript variable in a PHP variable?
To store a JavaScript variable in a PHP variable, you can use AJAX to send the JavaScript variable to a PHP script on the server. The PHP script can then receive the variable using $_POST or $_GET superglobals and store it in a PHP variable. This way, you can pass data between JavaScript and PHP seamlessly.
-
How can a JavaScript variable be transferred to a PHP variable?
A JavaScript variable can be transferred to a PHP variable by using AJAX (Asynchronous JavaScript and XML) to send the variable value to a PHP script on the server. The PHP script can then receive the variable value using the $_POST or $_GET superglobals, and assign it to a PHP variable. Another way to transfer a JavaScript variable to a PHP variable is by embedding the JavaScript variable value in a form and submitting the form to a PHP script, which can then retrieve the value using the $_POST or $_GET superglobals.
-
'How do I write a variable in a variable in Arduino?'
In Arduino, you can write a variable in a variable by using the concept of pointers. You can declare a pointer variable and then assign the address of the original variable to the pointer variable. This allows you to indirectly access the original variable through the pointer variable. Here's an example of how to write a variable in a variable in Arduino: ```C int originalVariable = 10; int *pointerVariable = &originalVariable; // Assign the address of originalVariable to pointerVariable *pointerVariable = 20; // Write a new value to originalVariable through pointerVariable ``` In this example, the value of originalVariable is changed to 20 by writing to it through the pointerVariable.
-
How can I output a batch variable in a variable name?
You can output a batch variable in a variable name by using the delayed expansion feature in batch scripting. To do this, you need to enable delayed expansion by using the "setlocal enabledelayedexpansion" command at the beginning of your script. Then, you can use the "!" symbol instead of "%" to access the value of a variable inside another variable. For example, if you have a variable named "var1" and you want to output its value in a variable named "var2", you can use the syntax "!var1!" to achieve this.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.